Overpack, Labpacks, Storage & Salvage Drums




Large Totes & Extra Large Totes


Overpack Drums
 

 
 
All Overpacks are constructed of tough, chemical resistant high density polyethylene. Overpacks meet Groups I, II and III packaging standards for hazardous materials. They are also nestable and include UV inhibitors. Screw top lids provide a secure tight seal and allow the container to incinerate completely. Compliance: DOT 49 CFR 173.25.

The 21299 Poly-Overpack™ 95 safely contains a wide range of hazardous materials, including acids, corrosives and damaged parts in 55 gallon drums. 95 gallon capacity. Poly-Overpack™ 95 with wheels is great for mobile spill kits. Regulations: UN/1H2/X113/S.
 For additional information such as Closure type, Inside Dimensions, Capacity and UN/Dot Rating see page 17 in the 2008 AMI Catalog.
 
 
 
Labpack

All Lab Packs  are constructed of tough, chemical resistant high density polyethylene. Labpacks have either a screw on lid or Plastic or Metal Lever-lock Lid and are ideal for storage, clean up and spill containment of containers 5 gallons or less. Compliance: DOT 49 CFR 173.12.
For additional information such as Closure type, Inside Dimensions, Capacity and UN/Dot Rating see page 17 in the 2008 AMI Catalog.
 
 Salvage Drums
 
 

Enpac Totes are the only stackable, nestable, forkliftable, water resistant, mobile totes on the market.  These units are available in two sizes, large and extra-large, and both offer a 500 lb. load bearing capacity.
The 21505 tote Inside Dimensions are: 34" x 25" x 24 1/4" with a Load Bearing Capacity UDL  of 500 lbs./21.77kg and with a Sump Capacity of 123 gal/467.4 l.
The 21525 Extra Large Tote Inside Dimensions are 41" x 37" x 26 3/4" with a Load Bearing Capacity
UDL of 500 lbs/226. kg and with a Sump Capacity of 223 gal/465.6 l.

 
    Style    Type   Dimensions Outside   Weight
21505   Large Tote   W/Lid   45" x 35.62" x 30.37"   48lbs/21.77kg
21525   Extra-Large  Tote   W/Lid   51.62" X 47 1/2" X 32 1/2"   76 lbs/34.47kg
21515   4" Polyure Wheel Kit            
21535   8" Solid Rubber Wheel kit            
 
All Salvage Drums are constructed of tough, chemical resistant high density polyethylene. Salvage Drums come with a Metal Lever-lock Lid or a Metal band/bolt Lid. Salvage Drums are used with damaged or leaking containers of hazardous materials or used absorbent materials contaminated with hazardous substance.  Require "Salvage Drum" labeling and must pass a 3-PSI pressure test. 
 
Compliance DOT 49 CFR 173.3.

For additional information such as Closure type, Inside Dimensions, Capacity and UN/Dot Rating see page 17 in the 2008 AMI Catalog